ITALCANNA CLIPPER

Italcanna

<p>The Mangusta is certainly among the first "real" sea rods with a length of 5 m. Too often, in fact, those looking for a long lever for sea fishing had to fall back on more or less powerful Bolognese rods made with reel seat attachments of insufficient strength and guides that were unsuitable in terms of diameter and quality, without considering the terrible loading action. With Mangusta, however, you will have a long rod at your disposal, capable of casting at a considerable distance and of managing weights of up to 130g. Its length (just under 5 meters in compliance with the regulations) allows the use of particularly long terminals or the use more hooks on the same line. In the latter case, using a single rod will therefore have a greater chance of capture. The summit always remains very sensitive and able to sense even small via ferratas. The barrel has a very small section and is excellently balanced thanks to the new "Balance Optimizer" system which involves the use of particular components and "Ultra Light" structure rings, let's not forget that we have a disadvantageous leverage of almost 1 m more compared to classic surf rods. All the composite elements are built with the finest high modulus and high resistance carbon fibres, while the rings are in Alconite and SIC on the most stressed parts. At the end of the stock, a comfortable knob and high-grip paint ensure a firm grip. The barrel is equipped as standard with a quality ring-saving cap. Mangusta is made entirely in Italy in the Italcanna factories, and therefore with easy availability of every single spare part.</p>

Italcanna

This surf rod has six telescopic sections that extend to a total length of 4.50 and provide plenty of casting power. The Fira was designed with special attention paid to continuity of action and power progression within the sections just below the tip (a weak point of almost all short-tip rods), achieving results never before obtained, with performance similar to those of traditional long-tip telescopic surf rods. As a result, this rod will ensure a smooth and progressive response in any situation and the gradual compression of the sections will produce a cushioning effect on the line. Constructed from HR-HM carbon with satin finish, it features a woven carbon butt section for better protection of underlying fibres from shocks and scratches. It is built with a Fuji reel seat and has no running guides on the tip. The handle is coated with a high-grip finish to ensure a firm hold in any situation. Optimum casting weight is between 125 and 145g, but heavier weights can be cast with ease.

Italcanna

New variant of the Dreaming rod that has been upgraded to bring it up to 130g. of ceiling. Made with HR carbon and HM (high modulus) both reinforced with nanocomposites mixed in the resin. Very light and balanced, it inherits the excellent qualities of its younger sister. Two interchangeable tips with power range 20 / 60g for the orange type and 70 / 130g for the yellow type. Currently available in the size of 4.30m. and soon also in 4.60m. The soft tip to increase sensitivity has been lengthened by an additional 10cm, so the reported lengths will increase by 10cm. with this peak.

Italcanna

<p>The New Sparviero LGT by Italcanna has an even more sensitive and thin tip and is therefore aimed at light weight leads and for use with a fixed drum reel. The optimal casting is between 75 and 125g. above and side. Due to the extreme sensitivity of the tip, this model is not aimed at technical angled throws. It is fitted with a screw reel seat as standard.</p>